Dearborn Wire and Cable


For Web Assistance: (800) 323-0198

Product Index


Check the Items You'd Like to Add to Your Quote or Order
Specialty Coaxial Cable FLEXEFORM ^TM .099 HAND FORMABLE SEMI-RIGID REPLACEMENT COAXIAL CABLE
The full range of Dearborn/CDT FlexeForm(TM) coaxial cables meet the electrical and dimensional requirements of standard semi-rigid coaxial cables and can be used without extensive process equipment. FlexeForm(TM) coaxial cables can be 'formed by hand' (or with the preferred use of a mandrel) resulting in decreased processing times and reduced scrap through their ability to be re-formed in the event of a processing error. Most constructions are also available with an overall jacket to provide protection against the elements where necessary. We can also manufacture custom constructions with impedances from 10 to 100 ohms in various sizes.

Consult factory for minimum requirements and availability. *Attenuation (typical): @ 400 MHz 12.0 dB/100ft *1,000 MHz 17.5 dB/100ft *3,000 MHx 31.0 dB/100ft *5,000 MHz 42.0 dB/100ft *10,000 MHz 56.0 dB/100ft *Shield DC Resistance: 4.5 Ohms/Mft

Conductors: Solid silver-plated copper covered steel.

Insulation: Tape wrapped polytetrafluoroethylene (PTFE).

Shield: Copper-tin composite having 100% coverage.

Jacket: See below.

FlexeForm(TM) .099 semi-rigid replacement coaxial cable is a commercial construction engineered to fill the size and electrical performance gap between FlexeForm(TM) .086 and FlexeForm(TM) .141. This construction utilizes a low loss air-spaced taped PTFE dielectric. This cable is ideal for specialized high frequency 50 ohm applications where its better attenuation justifies the use of a slightly larger construction. *FlexeForm(TM) .099 is appropriate for use as a delay line due to its solid overall electrical performance. Due to its low loss characteristics, this construction provides the optimum compromise between size and performance.

Part Number	Inner Conductor O.D. (in.)	Nom. O.D. over Dielectric in. mm	Nom. O.D. in. mm	Nom. Impedance	V/P	Max. Capacitance	Conductor Resistance	Jacket Type
FF099/50	.285	.085 2.16	.099 2.51	50 Ohms	76%	26 PF/ft	20.5 Ohms/Mft	None
FF099/50XE	.285	.085 2.16	.120 3.05	50 Ohms	76%	26 PF/ft	20.5 Ohms/Mft	FEP
FF099/50XV	.285	.085 2.16	.130 3.30	50 Ohms	76%	26 PF/ft	20.5 Ohms/Mft	PVC

If you wish to add the products to your quote or complete your quote check one of these buttons